Hello world with Azure Sphere MT3620 starter kit

 

[There are couple of changes and updates for this Azure spheres sdk CLI etc . SO PLEASE CHECK MICROSOFT DOCUMENTATION INCASE OF ANY DIFFICULTY QUCKSTART LINK ]

installation of SDK

Before starting installation you need to update your linux packages. I Am using Ubuntu 19.10.

use commands in your terminal

sudo apt-get update
sudo apt-get install -y net-tools curl

then follow the steps

Download the install script from here

https://aka.ms/AzureSphereSDKInstall/Linux

• enable execution of installation script using

chmod +x install_azure_sphere_sdk.sh

• in that directory now run the installation script using

sudo ./install_azure_sphere_sdk.sh

• after this you will get some primary key fingerprint.make sure that the key is same as key shown here
• then reboot your pc

installation of CMake and Ninja

In this tutorial iam using CLI to build apps for azure sphere, you can use visual studio code also. For building apps we need to install CMake and Ninja

use the command for the installation

sudo apt install cmake ninja-build

claiming device

• Connect your device to pc using usb
• open CLI
• add new user using command

azsphere login --newuser <email-address>

• then login

azsphere login

• Now we have to create a new tenant

azsphere tenant create --name <my-tenant>

tenant name can not rename after, so make sure you need that name

• now we can enable app development on the device

azsphere device enable-development

• then claim your device

azsphere device claim

• if you want to connect your device to a wifi network then add ssid and password using

azsphere device wifi add --ssid <yourSSID> --psk <yourNetworkKey>

then to check the connection status, use command

azsphere device wifi show-status

it will show as

SSID                : xxxx
Configuration state : enabled
Connection state    : connected
Security state      : psk
Frequency           : 2442
Mode                : station
Key management      : WPA2-PSK
WPA State           : COMPLETED
IP Address          : 192.168.1.xxx
MAC Address         : 00:02:c5:03:72:cc

build hello world app

• download and clone https://github.com/Azure/azure-sphere-samples.git
• type the below command

azsphere device enable-development

To create the build and.imagepackage files for the HelloWorld_HighLevelApp sample application:

• create a new directory and enter into it using

mkdir build 
cd build

now we have created a new directory named build

• now in /azure-sphere-samples-master/Samples/HelloWorld/HelloWorld_HighLevelApp open main.c file include

/* Copyright (c) Microsoft Corporation. All rights reserved.
Licensed under the MIT License. */
// This minimal Azure Sphere app repeatedly toggles GPIO 8, which is the red channel of RGB
// LED 1 on the MT3620 RDB. Use this app to test that device and SDK installation succeeded
// that you can build, deploy, and debug a CMake app with Visual Studio.
//
// It uses the API for the following Azure Sphere application libraries:
// - gpio (digital input for button)
// - log (messages shown in Visual Studio's Device Output window during debugging)
#include <stdbool.h>
#include <errno.h>
#include <string.h>
#include <time.h>
#include <applibs/log.h>
#include <applibs/gpio.h>
// By default, this sample's CMake build targets hardware that follows the MT3620
// Reference Development Board (RDB) specification, such as the MT3620 Dev Kit from
// Seeed Studios.
//
// To target different hardware, you'll need to update the CMake build. The necessary
// steps to do this vary depending on if you are building in Visual Studio, in Visual
// Studio Code or via the command line.
//
// See https://github.com/Azure/azure-sphere-samples/tree/master/Hardware for more details.
//
// This #include imports the sample_hardware abstraction from that hardware definition.
//#include <hw/sample_hardware.h>//anas
#include <hw/mt3620_rdb.h>//anas
/// <summary>
/// Exit codes for this application. These are used for the
/// application exit code.  They they must all be between zero and 255,
/// where zero is reserved for successful termination.
/// </summary>
typedef enum {
ExitCode_Success = 0,
ExitCode_Main_Led = 1
} ExitCode;
int main(void)
{
Log_Debug("Starting CMake Hello World application...\n");
int fd = GPIO_OpenAsOutput(MT3620_RDB_HEADER1_PIN6_GPIO, GPIO_OutputMode_PushPull, GPIO_Value_High);
int fd1= GPIO_OpenAsOutput(MT3620_RDB_HEADER1_PIN4_GPIO, GPIO_OutputMode_PushPull, GPIO_Value_High);
if (fd < 0) {
Log_Debug(
"Error opening GPIO: %s (%d). Check that app_manifest.json includes the GPIO used.\n",
strerror(errno), errno);
return ExitCode_Main_Led;
}
const struct timespec sleepTime = {.tv_sec = 0, .tv_nsec = 500000000};
while (true) {
GPIO_SetValue(fd, GPIO_Value_Low);
nanosleep(&sleepTime, NULL);
GPIO_SetValue(fd1, GPIO_Value_High);
nanosleep(&sleepTime, NULL);
GPIO_SetValue(fd, GPIO_Value_High);
nanosleep(&sleepTime, NULL);
GPIO_SetValue(fd1, GPIO_Value_Low);
nanosleep(&sleepTime, NULL);
}
}

just copy above code and save and replace main.c(i have included #include <hw/mt3620_rdb.h> and changed pinsetup I am using external LEDs in PWM pins in socket 1 and 2 you can use build in led also)

• now open app_manifest.json file in azure-sphere-samples-master/Samples/HelloWorld/HelloWorld_HighLevelApp
• replace the data in app_manifest.json as below and save it.

{
"SchemaVersion": 1,
"Name": "HelloWorld_HighLevelApp",
"ComponentId": "1689d8b2-c835-2e27-27ad-e894d6d15fa9",
"EntryPoint": "/bin/app",
"CmdArgs": [],
"Capabilities": {
"Gpio": [ "$MT3620_RDB_HEADER1_PIN6_GPIO","$MT3620_RDB_HEADER1_PIN4_GPIO"]
},
"ApplicationType": "Default"
}

you need to use correct pin numbers which can be found in mt3620_rdb.json

I refer this for pinouts

• now run cmake in command line

cmake \
-G "Ninja" \
-DCMAKE_TOOLCHAIN_FILE="/opt/azurespheresdk/CMakeFiles/AzureSphereToolchain.cmake" \
-DAZURE_SPHERE_TARGET_API_SET="4" \
-DAZURE_SPHERE_TARGET_HARDWARE_DEFINITION_DIRECTORY="/home/bagmo/Desktop/azure-sphere-samples-master/Hardware/mt3620_rdb" \
-DAZURE_SPHERE_TARGET_HARDWARE_DEFINITION="mt3620_rdb.json" \
--no-warn-unused-cli \
-DCMAKE_BUILD_TYPE="Debug" \
-DCMAKE_MAKE_PROGRAM="ninja" \
"/home/bagmo/Desktop/azure-sphere-samples-master/Samples/HelloWorld"

make sure that path are correct for DAZURE_SPHERE_TARGET_HARDWARE_DEFINITION_DIRECTORY=

and the last parameter should be path for HelloWorld_HighLevelApp sample.

• run below command to build the application and create the imagepackage file.

ninja

it will return like

[5/5] Generating HelloWorld_HighLevelApp.imagepackage
Azure Sphere Utility version 20.1.6.56107
Copyright (C) Microsoft Corporation. All rights reserved.
Start time (UTC): Monday, 30 March 2020 06:46:43
verbose: Creating image package.
verbose: Azure Sphere application image package written.
verbose: Appending metadata.
verbose: Wrote metadata:
Section: Identity
Image Type:           Application
Component ID:         1689d8b2-c835-2e27-27ad-e894d6d15fa9
Image ID:             dfccede2-fde7-489d-8056-5013e314556e
Section: Signature
Signing Type:         ECDsa256
Cert:                 a8d5cc6958f48710140d7a26160fc1cfc31f5df0
Section: Debug
Image Name:           HelloWorld_HighLevelApp
Built On (UTC):       30/03/20 6:46:44 am
Built On (Local):     30/03/20 12:16:44 pm
Section: Temporary Image
Remove image at boot: False
Under development:    True
Section: ABI Depends
Depends on:           ApplicationRuntime, version 4
verbose: Packaging completed successfully.
verbose: Output file is at: /home/bagmo/Desktop/build/HelloWorld_HighLevelApp.imagepackage
Command completed in 00:00:01.5862753.

now we can flash builded app to azure sphere using

azsphere device sideload deploy --imagepackage HelloWorld_HighLevelApp.imagepackage

now the device will be flashing and rebooting.

Troubleshooting

• if there is already an app is running in your device which is using same gpio then you will not able to flash the app.

error: Could not deploy application to device: Application manifest requests a GPIO that is already in use by another application.

in this case delete other apps running in device using

azsphere device sideload delete

• if the below error is showing

ERROR: Could not establish SLIP connection.

disconnect your device usb and reconnect then enter the below command

sudo /opt/azurespheresdk/Tools/azsphere_connect.sh

• to check running status of applications use command

azsphere device app show-status

New changes after updates in azure

After couple of months in jan 2021 i checked the azure sphere and platform again,some of updates were there.New SDK version and new CLI was introduces.so i thought to update this tutorial with those data.

If any of you have trouble to build a highlevelapp follow this tutorial in microsoft document.